SPECIFICATIONS

Average Life (hrs): 50000

Brand Name: MJJC

Certification: ce,EMC,FCC,LVD,ROHS,UL

Choice: yes

Color Temp(K): 6000K

High-concerned chemical: None

Is Batteries Included: No

Is Smart Device: Yes

Item Type: Strip

LED Chip Brand: SANAN

LED Chip Model: SMD2835

LEDs Number/M: 126

Luminous Flux: 249-2000

Nominal Voltage: 24V

Occasion: LIVING ROOM

Origin: Mainland China

Power Consumption (W/m): 8.64W/m,11.52W/m

Power Generation: Switch

Power Source: DC

Specifications (light beads / m): 126

Strip type: SMD

Voltage: 24v

Waterproof: No

Product Name: WS2811 Horse Race Led Strip
LED Type: SMD 2835
LED Qty: 126LEDs/M
PCB width:10mm （ Some others use 8mm PCB, 10mm is better )
Max Power: 8-10W/M
Working Voltage: DC 24V
Color:Cool White/Natural White/ Warm White
Color Temperature: 3000K, 4000K, 6000K
IP Rate: IP20 Non-waterproof
Connector: 3 Pin Male & Female Connector
Package: 5M/Roll or 10M/Roll

Connection:
Red Wire: +24V
Green Wire:DI/DATA
White/Black wire: GND / -24V

*** Product Parameters of the Sync Controller:
Product Name: Single Color Horse Race Led Strip Controller
Working Voltage: DC5-24V ( The controller dont connect to the power supply)
Control Distance: < 20m
Battery Type: CR2032 button cell ( Not included)
Modes: 26 Different modes built-in controller.
With Switch Function( Green Wireconnect to a normal/smart switch): Turn ON,the lights running, Turn OFF, the lights backflow.
Max Pixel Control:Max Control Pixels:3200pcs Pixels,if more than 3200pcs pixels,just add extra receiver or amplifier to realize sync working.
Installation: With 2pcs double-side tape,anywhere to stick.
3Keys Remote Function: ON/OFF, Model Key, Brightness UP/Down,Speed UP/Down

*** Features:
1. one receiver can be controlled by max 6pcs 3keys panel remotes.
2. Two or more receivers can be connected together,realize sync working. The wire between two receiver can be up to max 10metes for extension.
3. The controller can be work with normal switch, Turn ON/OFF by the switch without remote.It also can connect to Mihome Smart Switch to realize voice control.

*** Sync Projects:
Wire Connection Sync Working: 99.99% sync (Recommend)
Wireless connection sync working: Maybe has delay


*** How to setting pixels?
Step 1: Turn OFF the lights
Step 2: Long press "Mode" keys 5 seconds,press "Speed" keys to increase the pixels quantity, Press "Mode" keys to decrease the pixels quantity.
Step 3: Press " ON/OFF" to save, Exit.
Default factory setting is 80pixels,max up to 3200pixels. If you found some led strip is not working over 10m, please kindly do pixel setting as above steps.

*** How to pair Remote to the Receiver,make them working independently ?
Step 1: Turn on the power supply.
Step 2: Long press "Mode"keys 3seconds within 2seconds after powering ON.
Step 3: Sucessfully if the led strip quick flash 3 times.
1pc receiver can be controlled by max 6pcs panel remote.